Home Knowledge Content

Fault Detection Steps for Humidifier

Jul 28, 2020

The first step: the atomization film to remove the scale

The humidifier has wind and no mist. If you use tap water for a long time, the remaining scale causes the oscillating film to form water and alkali, which can not operate normally, and the mist will naturally be less or not spray out. Treatment method: homemade lemon water to remove scale.

 Note: Do not use strong acid, which is not conducive to maintenance and has potential safety hazards.

Step 2: Check whether there is a problem with the transducer

Some of the atomizing film is made of stainless steel. You cannot scratch it with a hard object when handling. Once the metal coating falls off, the atomizing film will not work properly and the mist will not come out. Be careful when cleaning.

Step 3: Check if the fan is out of wind

There are two conditions for the humidifier to work: 1. The ceramic oscillator vibrates to produce water mist. 2. The fan rotates to send out the water mist. If it can work but no water mist is sprayed out, the operation is improper and the fan fails. Treatment method: if it hasn't been used for too long, it is stuck, add some lubricating oil and slap it gently.